4 Residential Electrical Wiring Tips

When it comes to residential electrical wiring, it is crucial that every single step in the process is done correctly the first time around. People without electrical wiring experience can save themselves a lot of time and hassle on their wiring project by listening to experts with years of wiring experience and following their tips and tricks of the trade.

Tips for residential electrical wiring

In order to avoid costly, or even dangerous, mistakes when installing residential electrical wiring, homeowners should take precautions and steps that will help everything run smoothly. People who want to make the residential electrical wiring process as efficient and as safe as possible should keep these tips in mind:

1. Keep the coil straight

In order to pull the coil through the framing of a house efficiently, people who are working with wiring should keep the coil straight and tangle-free. People often make the mistake of immediately opening the plastic wrapping of the coil or pulling the coil from the center. This makes it difficult to move the coil around the room, and it allows the coil to get twisted and tangled.

The best way to unroll the coil is to grab approximately 12 feet of the coil (approximately four loops) from the center of the roll. After grabbing these loops, the individual should toss the coil on the floor the way they would unroll a garden hose. This will keep the coil straight while ensuring that it is still easy to carry around when necessary.

2. Always test the wires

One of the biggest mistakes people make when working on electrical wiring in their homes is forgetting to test their wires before they touch them. Electrical wiring is serious business, but even wiring experts neglect to test their wires from time to time.

It is never worth the risk to assume that the power is off. Homeowners or people working on residential electrical wiring should invest in a small circuit tester that will show whether or not a wire is live.

3. Plan and mark box locations

Before starting any work with the wiring, homeowners should plan out, measure, and mark where every outlet and switch will be located. This will help prevent them from putting any outlets too close together, too low, or too far away from where they are going to want their furniture and light fixtures.

4. Wire recessed light fixtures before nailing

Experts and first-timers alike typically nail the fixtures for recessed lights into the ceiling prior to installing the wiring. This means that when they are ready to attach the wires, they have to climb on a ladder and possibly strain their necks throughout the process.

The best way to avoid this strain and help this process run smoothly is to wire the fixture on the ground. After the wiring is attached, the fixture can be nailed in the ceiling with ease.

Consult an expert

Because of the dangers involved with residential electrical wiring, homeowners should consult with an electrician prior to conducting any wiring work on their own. An electrician will make sure that the wiring is safe and up to code while preventing costly errors.

Request an appointment here: https://www.exceptionalelectric.com or call Exceptional Electric at (636) 237-8435 for an appointment in our Kirkwood office.

Check out what others are saying about our services on Yelp: Read our Yelp reviews.

Recent Posts

Why Your Electrician Wants You To Skip The DIY Projects

Trying to turn necessary electrical work into a DIY project can be tempting, but it is never a good idea as it can be dangerous and cause more problems than it solves. In an attempt to save money, many make the mistake of trying tough electrical projects, but it is often more cost-effective and far…

3 Home Safety Tips From An Electrician

Looking for an electrician? A qualified electrician knows exactly what to do in order to ensure any electrical problems are properly corrected, which is important as electrical problems can potentially cause a home fire. Learning some essential home safety tips from a professional and experienced electrician is a great way to promote a safe home…

Reasons To Hire A Licensed Electrical Contractor

Learning the difference between a licensed electrical contractor and an electrician is necessary, as this allows you to choose the right type of electrical professional. A licensed electrical contractor is a professional who performs specific tasks related to the installation, maintenance and design of an entire electrical system. An electrician is also a professional who…

Is It Safe To Reset My Circuit Breaker? [Ask An Electrician]

Finding an electrician is something most homeowners do when they are experiencing problems with their home’s circuit breaker. While many times when a circuit breaker trips, all that needs to be done is pushing the lever back onto the on position in order to once again receive electricity to a certain area of the house.…

Recent Posts

Why Your Electrician Wants You To Skip The DIY Projects

Why Your Electrician Wants You To Skip The DIY Projects

Trying to turn necessary electrical work into a DIY project can be tempting, but it is never a good idea as it can be dangerous and cause more problems than it solves. In an attempt to save money, many make the mistake of trying tough electrical projects, but it is often more cost-effective and far…

Home Safety Tips From An Electrician

3 Home Safety Tips From An Electrician

Looking for an electrician? A qualified electrician knows exactly what to do in order to ensure any electrical problems are properly corrected, which is important as electrical problems can potentially cause a home fire. Learning some essential home safety tips from a professional and experienced electrician is a great way to promote a safe home…